Sep 28, 2026B2B & Sourcing
Epoxy Color Sand Flooring FAQ: 10 Questions Distributors Ask Before Buying
Answers the 10 questions flooring distributors ask about epoxy color sand, including tile application, primer, thickness, coverage, curing, maintenance, MOQ and OEM.
Epoxy Color Sand Flooring FAQ: 10 Questions Distributors Ask Before Buying
Epoxy color sand flooring is a self-leveling resin flooring system designed to create a seamless decorative surface over properly prepared substrates.
For flooring distributors, tile suppliers, decorative concrete suppliers, contractors, and online sellers, the main appeal is straightforward: existing floors can often be renovated without full demolition, reducing installation steps while creating a completely new surface.
Before adding the product to a new market, however, distributors usually ask the same practical questions about application, coverage, substrates, curing, and supply.
Here are the answers to the most common questions.
1. What Is Epoxy Color Sand Flooring?
Epoxy color sand flooring combines epoxy resin, mineral fillers, and decorative colored sand in a self-leveling flooring system.
After the components are mixed, the material is poured onto the prepared substrate and spread using a notched trowel.
The material then self-levels to create a continuous surface.
Unlike traditional tile installation, the finished floor has no tile joints across the main surface.
JUKE Epoxy Color Sand Self-Leveling is designed primarily for indoor floor renovation and can be used on suitable existing substrates including tile, terrazzo, and concrete.
2. Can It Be Applied Directly Over Existing Tiles?
Yes, provided the existing tiles are stable, dry, clean, and properly prepared.
This is one of the main differences between a zero-demolition renovation system and conventional floor replacement.
Instead of:
Remove tiles → Dispose of waste → Repair substrate → Install new floor
the project can often follow:
Inspect → Prepare → Mix → Pour → Spread
Loose tiles, hollow areas, damaged joints, cracks, oil, wax, and contamination must still be addressed before application.
Zero demolition does not mean zero preparation.
3. Is a Primer Required?
Not always.
A separate primer is normally not required on suitable dense substrates such as properly prepared existing tiles.
Concrete requires more evaluation because its porosity can vary considerably.
Highly porous concrete may need an epoxy primer or sealing treatment before the main self-leveling layer is applied.
A simple rule for contractors is:
Dense substrate: evaluate and prepare.
Porous substrate: consider primer or sealing.
Damaged substrate: repair first.
The correct installation method should always follow the actual substrate condition.
4. How Thick Is the Flooring?
The recommended JUKE self-leveling layer is approximately 1.8–2.0 mm over a properly prepared substrate.
Applying more material does not automatically produce a better floor.
Large holes, deep joints, cracks, or major unevenness should be repaired before the finishing layer is installed.
A flat substrate helps contractors maintain a more consistent thickness and makes material consumption easier to predict.
5. How Much Area Does One Set Cover?
JUKE's current export specification is:
Actual coverage depends on:
- Substrate flatness
- Surface porosity
- Tile joint depth
- Existing damage
- Repair requirements
- Final application thickness
For example, a relatively flat 50 m² floor would require approximately five 20 kg sets under typical conditions.
Contractors should always inspect the substrate before confirming final material quantity.
6. How Is the Product Applied?
The basic process is simple:
Step 1: Inspect
Check whether the existing floor is stable and suitable for renovation.
Step 2: Prepare
Repair defects and remove dust, oil, loose material, and other contamination.
Step 3: Mix
Mix the two components thoroughly until the material is uniform.
Step 4: Pour
Pour the mixed material onto the prepared floor.
Step 5: Spread
Use a notched trowel to distribute the material at a controlled thickness.
Step 6: Self-Level
Allow the material to flow and form a continuous finished surface.
Preparation should be completed before mixing begins because the material has a limited working time after the components are combined.
7. How Long Does Epoxy Color Sand Flooring Take to Cure?
- 4–6 hours: surface dry
- 24 hours: hard dry
- 48 hours: light pedestrian traffic
- 72 hours: vehicle traffic
Temperature, humidity, substrate moisture, and application conditions can affect actual curing.
A floor that looks dry after several hours is not necessarily ready for traffic.
For garage projects in particular, vehicles should not return until the recommended curing period has been completed.
8. Where Can Epoxy Color Sand Flooring Be Used?
Suitable applications can include:
- Residential interiors
- Garages
- Retail stores
- Showrooms
- Hotels
- Offices
- Corridors
- Commercial renovation projects
- Suitable concrete floors
- Existing tile and terrazzo floors
The system is intended for floors rather than walls.
For renovation projects, its strongest value proposition is often the ability to create a new decorative surface while retaining a suitable existing substrate underneath.
9. Is Epoxy Color Sand Flooring Difficult to Maintain?
Regular maintenance normally includes:
- Sweeping or vacuuming loose dust
- Removing sand and abrasive particles
- Mopping with water or a suitable neutral cleaner
- Cleaning spills promptly
- Avoiding unnecessary dragging of sharp objects
Unlike traditional tile floors, there are no grout joints across the main surface collecting dirt.
Correct installation remains important because maintenance cannot compensate for poor substrate preparation.
10. What Should Distributors Know Before Ordering?
For a distributor, technical performance is only one part of the decision.
The product also needs to be practical to introduce into a local market.
JUKE supports flooring distributors, building material suppliers, and online sellers with:
- Factory-direct supply
- OEM and private label options
- Marketing photos and videos
- Application guidance
- Technical support
- Low MOQ starting from 36 sets
A distributor can therefore begin with a relatively small trial order, test local demand, and scale inventory as sales develop.
The product is particularly easy to demonstrate using before-and-after content because customers can immediately understand the renovation concept:
Keep the existing floor. Upgrade the surface. Avoid unnecessary demolition.
Quick Specifications
For buyers evaluating JUKE Epoxy Color Sand Self-Leveling, the main specifications are easy to summarize:
System: Two-component epoxy color sand flooring
Application: Self-leveling
Typical thickness: Approximately 1.8–2.0 mm
Standard export set: 20 kg
Typical coverage: Approximately 10 m² per set
Light pedestrian traffic: Approximately 48 hours
Vehicle traffic: Approximately 72 hours
Suitable renovation substrates: Properly prepared tile, terrazzo, and concrete
MOQ: 36 sets
Supply: Factory direct
OEM: Available
Final Thoughts
For distributors considering a new flooring category, epoxy color sand provides a simple product proposition.
It combines:
Zero-demolition renovation + direct-over-tile capability + self-leveling application + seamless decorative finish.
The most important factor is still proper substrate evaluation.
Stable tile can often be renovated without removal. Porous concrete may require additional treatment. Cracks and damaged areas should be repaired before installation.
When those fundamentals are handled correctly, epoxy color sand provides a practical option for both residential and commercial floor renovation.