Epoxy Color Sand

How Much Does Epoxy Color Sand Flooring Cost in 2026?

Epoxy color sand flooring cost depends on coverage, thickness and delivery. Learn how material cost per square metre is calculated before you order.

Concrete garage floor resurfaced with self-leveling epoxy colored sand without demolition

How Material Cost per Square Metre Is Calculated

There is no single price per square metre for epoxy color sand self-leveling flooring. The material cost per square metre depends on the set price in your quotation and the coverage that set delivers — and both vary between suppliers. The calculation itself is simple:
Material cost per square metre = complete set price ÷ expected coverage per set
For JUKE, one standard set is a factory-matched 20 kg two-component kit (Part A and Part B, mixed 8:1 by weight) that covers approximately 10 m² at a typical consumption of approximately 2 kg/m². Actual coverage depends on substrate condition, flatness, application technique and material loss.
A worked example shows why the set price alone is misleading. The figures below are examples, not JUKE prices and not competitor quotations:


Quotation detail
Offer A
Offer B
Complete set price
$72 (example)
$80
Expected coverage
6 m²
10 m²
Material cost per m²
$12
$8
Offer B has the higher set price but the lower material cost per square metre. A lower bucket price can become a higher purchasing cost when the set covers less area, or when hardener, decorative aggregate or other required materials are supplied separately. Always compare complete systems on the same coverage basis.
Compare cost per finished square metre, not price per bucket.

What Makes Up the Total Cost of a Finished Floor

The set price is only one part of what a finished floor costs. Before comparing numbers, check what each quotation actually includes:
  • Material — the 20 kg sets (Part A and Part B, factory-matched, 8:1 by weight).
  • Sealing primer — for concrete substrates. Concrete must be primed with the sealing primer, which is supplied separately from the self-leveling sets. On suitable existing tiles, no separate primer is required.
  • Substrate repair — filling cracks, repairing damaged joints and correcting uneven areas. Epoxy color sand is a 1.5–2.0 mm decorative layer; it is not a repair material for major substrate defects.
  • Topcoat (optional) — for floors in direct sunlight, an anti-UV polyaspartic topcoat is recommended, because standard epoxy color can slowly fade under long-term direct UV. A topcoat also gives a glossier finish for customers who want one.
  • Tools and consumables — mixing, spreading and cleaning supplies.
  • Installation labor — rates vary by market and by installer.
  • Delivery and import costs — freight, insurance where applicable, destination handling, customs clearance, duties and taxes, and delivery to the warehouse.
A quotation that looks cheaper may exclude primer, repair material, a topcoat or delivery. Ask every supplier to list what is included before you compare.


How Thickness Changes the Cost

JUKE epoxy color sand self-leveling is applied at 1.5–2.0 mm. The planning figures — approximately 10 m² per 20 kg set at approximately 2 kg/m² — apply at that standard thickness range.
A thicker layer uses more material per square metre, so the same set covers less area. Do not stretch the material thin to cover more area: uneven distribution can affect appearance and layer continuity. If a project specifies a finished thickness above the standard range, ask JUKE to confirm the expected consumption for that requirement and substrate before ordering.
Baseline set quantities at standard coverage, before any allowance for substrate condition or installation loss:

Floor area
Baseline sets
Coverage
200 m²
20 sets
Approximately 2,153 sq ft
500 m²
50 sets
Approximately 5,382 sq ft
1,000 m²
100 sets
Approximately 10,764 sq ft
Baseline sets are the floor area divided by 10, rounded up to whole sets. Add a few sets as allowance for cutting and installation loss — the right allowance depends on substrate condition and layout. JUKE's minimum order is one pallet of 36 sets, which covers approximately 360 m² at standard coverage, and colors can be mixed on one pallet. For the full quantity method, use the coverage calculator guide.

Material Cost vs Installed Cost

Material cost and installed cost answer different questions. A distributor buying sets needs the material cost per square metre. A property owner comparing finished floors needs the installed cost per square metre, which adds surface preparation, repairs, primer application, labor, tools and any topcoat.
Labor and preparation costs vary widely by country and region, so an installed-price range from one market does not transfer to another. When you compare installed quotations, check that each one covers the same preparation, thickness, system and finish — otherwise the comparison is meaningless. For the full comparison method, read the supplier guide.


How to Compare Two Quotes

Before you accept a quotation, check four things:
  1. Is it the same system? Confirm the product name, components, mixing ratio and coverage — not just the words ‘epoxy flooring’.
  1. Is the coverage the same? Convert each offer to material cost per square metre using the formula in the first section.
  1. Is primer or a topcoat included? Concrete needs the sealing primer; a UV topcoat is separate. An offer that excludes them is not cheaper, only less complete.
  1. Are delivery terms the same? Compare the cost of stock arriving at your warehouse, using the same destination and shipment assumptions for every offer.
The supplier guide linked above gives the full checklist, including packaging, documents and batch traceability.


A Worked Example: A 200 m² Warehouse Floor

A distributor plans a 200 m² warehouse floor on new concrete. Using the standard planning figures:
  • Baseline material: 200 m² ÷ 10 m² per set = 20 sets.
  • Allowance: add a few sets for cutting and installation loss — plan 22 sets for this example.
  • Primer: new concrete must be primed with the sealing primer first, supplied separately from the sets.
  • Colors: any of the 12 standard colors, mixed on the pallet if needed.
Delivery is quoted separately once the delivery address is known. To turn this example into a firm quotation, send JUKE the floor area, substrate type, required thickness, colors and delivery location.


Frequently Asked Questions

How much does epoxy color sand flooring cost per square metre?

There is no single figure. Material cost per square metre equals the complete set price divided by the expected coverage per set, and both vary between suppliers. Send JUKE the floor area, substrate, required thickness and delivery location for a factory quotation.

Why do two quotes for the ‘same’ product differ so much?

Quotations often describe different systems, coverage rates or included materials. One may exclude primer, a topcoat or delivery. Convert each offer to material cost per square metre and check what is included before comparing.

Does the set price include primer?

No. Primer is supplied separately. Concrete must be primed with the sealing primer; suitable existing tiles need no separate primer.

Does color affect the price?

The 12 standard colors can be mixed on one pallet. A custom exclusive color is available on request — ask JUKE for a quotation for your requirement.

What is the minimum order?

One pallet of 36 sets, covering approximately 360 m² at standard coverage, with mixed colors available.

What should I send to get an accurate quote?

Floor area in square metres or square feet, substrate type (concrete or tiles), required thickness, colors, and the delivery location.


Request a Factory Quote

JUKE supplies factory-direct epoxy colored sand self-leveling flooring for distributors, wholesalers, tile suppliers and retail channels. Share your floor area, substrate, required thickness, colors and delivery location to discuss product documents, samples, OEM labels and a trial order starting from 36 sets.
A free 1 kg sample is available for testing batch product performance; the customer pays the courier freight. See how to evaluate samples and the product page.